Automatizing the power grid

The electric grid is modernizing, helped along by IEC standards

By Catherine Bischofberger

Human Machine Interfaces (HMIs) play a key role in grid automation. A new IEC standard is in the works to make these systems vendor-agnostic.

CSIRO_ScienceImage__A_man_looking_at_a_tablet_in_an_energy_facility Human machine interfaces are widespread across transmission and distribution networks (Photo: CSIRO Wikimedia Commons)

In this day and age, relations between humans and machines have become rather fraught. A growing number of anxieties crystallize around the use of robots and automation in various industries, not to mention our homes. Things were quite different in the late 19th Century, when the introduction of the first machines were expected to relieve people from toiling away for long hours in exhausting circumstances. Families, in particular, reaped the benefits from time-saving appliances. Washing machines, dishwashers and microwaves gradually became mass market consumer goods throughout the 20th Century.

Nowadays, we worry about robots taking our jobs and becoming smarter than us. But whether we like it or not, the future spells an increasing interaction with machines in one form or another. As this trend intensifies, human machine interfaces (HMIs) will become an ever more important technology for us to master as they will enable us to control and interact with machines. While these three letters, HMI, might seem like just another acronym, they are one of the keys to our future world. And one of the areas where HMIs are already ubiquitous is in electricity generation and transmission. They are a key feature of grid modernization.

HMIs and the electricity grid

You can find HMIs in power plants and substations as well as in wind and solar farms. According to the IEC glossary, it is a “display screen, either as part of an intelligent electronic device (IED) or as a stand-alone device, presenting relevant data in a logical format, with which the user interacts. An HMI typically presents windows, icons, menus and pointers, and may also include a keypad to enable user access and interaction.”

Power grids are getting smarter which allows them to operate in a more energy efficient and effective manner; HMIs are typically “the face” of this process. The HMI application plays a key role in the visualization and control of substation automation systems or the monitoring of the real time status of a solar or wind farm, for example. Engineers, technicians and operators depend on the information collected and relayed by IEDs to get a clear picture of the state of the substation and the distributed energy resources (DER). These DERs could be wind turbines, a solar farm or a microgrid, for example. As the power grid continues to modernize, the dependency on HMI applications will therefore increase and operators will require help to monitor and control multi-vendor systems.

HMI applications are built upon graphical building blocks including basic shapes, colours, text, forms or pages to communicate and exchange information. Utilities increasingly want HMIs to work with any vendor IED, requiring minimal manual configurations. A vendor-agnostic solution would simplify installation, reduce maintenance costs and diminish the complexity of power automation systems. It would facilitate the interoperability with multi-vendor IEDs and support data-driven configurations that place the work burden on tools instead of human beings.

Unfortunately, all the graphical components and building blocks that go into an HMI are assembled in a proprietary fashion by HMI software manufacturers. To date, there aren’t any standardized means of specifying, designing and commissioning HMI applications.

New international standard in the works

But this is about to change. The IEC is working on a new document which aims to define the configuration languages required to achieve digital substations, including the HMI application. The planned standard, which is currently being drafted, will be part of the IEC 61850 series of publications, which includes some of the core international standards used for integrating digital communication processes into the existing electrical grid.

One of the objectives of the new publication is to automatically generate the HMI application, including all the associated data mappings and graphical renderings. This effectively dispenses operators, engineers or technicians from carrying out a manual configuration of the substation system and therefore saves time and cost for utilities by using resources more efficiently.

It also removes the risk of human error. “You could call it 'magical engineering': instead of taking weeks, sometimes even months, to configure the HMI applications, it literally will take minutes and even seconds for smaller substations,” says Dustin Tessier, who leads the task force responsible for the new standard project inside the IEC.

California dreamin’

The HMI document is based on a proof of concept technology developed by Southern California Edison (SCE), the primary electricity supply company for most of Southern California. For many in the electricity transmission industry, SCE is viewed as a compass: other utilities follow the company’s technology roadmaps and its data-driven HMI application is just another example of its technological savviness. The HMI is part of a 3rd generation substation automation architecture based on IEC 61850 standards, developed by the company.

Mehrdad Vahabi is one of the engineers who worked on the HMI prototype. “Southern California Edison has always been a forward-thinking utility. In 2010-11, the company decided to modernize the grid. While HMIs were already used, they were proprietary which created a number of problems, including cost, the amount of manual work and the time required to make changes to the systems and so on. These legacy problems with HMI were one of the major reasons for moving to 3rd generation substation automation,” Vahabi explains.

During their research, SCE engineers came into contact with the IEC 61850 standards and their applications for substation automation. “They are a very useful tool set but the HMI part was not yet standardized. We got involved with the IEC experts working on these aspects. We proceeded to implement our prototype in the field and give them information which was fed into the drafting of the new IEC document,” Vahabi adds. SCE has already started implementing the new HMI in its substations. “The plan is to automate 400 substations with this SA-3 technology by 2028,” Vahabi indicates. Further down the line, the company plans to prototype a totally virtualized substation automation system in the lab.

It may be a brave new and increasingly complex world out there but it would seem that, with HMIs, we have some of the tools to overcome many of these complexities. And the power grid is a great place to start.

Gallery
X-PylonsSunset- The power grid is modernizing (Photo: Wikimedia Commons)
CSIRO_ScienceImage__A_man_looking_at_a_tablet_in_an_energy_facility Human machine interfaces are widespread across transmission and distribution networks (Photo: CSIRO Wikimedia Commons)
electricians With HMIs, there is less need for human intervention (Photo: Airman st Class Franklin R.Ramos