marine energy sort by issue
In addition to its regular Technical Committees, the IEC has a number of Strategic Groups, Sector Boards and Technical Advisory Committees which report to the Standardization Management Board. This month, e-tech announces various changes and nominations.
While oceans are an enormous source of renewable energy with the potential to satisfy an important percentage of the world's demand for electricity, marine energy has not evolved at the same rate as other types of renewable energy. Although there has been on-going research in this field for the last 30 years, the technologies developed to harness the energy from waves, tidal and water currents are still at early stages of development. Driven by the necessity to look for alternative options to increase the amount of energy produced, some countries have recently started to invest in projects that convert ocean power into electric power.
Oceans offer an enormous source of renewable energy with the potential to satisfy an important percentage of the world's demand for electricity. Marine energy however has not evolved at the same rate as other types of renewable energy. While research in this field has been ongoing for more than 30 years, the technologies used to harness the energy from waves and from tidal and water currents are still in development. Driven by the necessity to look for alternative options to increase the amount of energy produced, some countries have started to invest in projects that convert ocean power into electric power.
The ever increasing demand for electricity and the need to reduce the share of fossil fuels in power generation have led to rapid development and growth of the RE (renewable energy) sector. The IEC, which has been at the forefront of international standardization in the wind, solar and marine energy fields for many years, has now gone a step further and launched IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.
The IEC, which has been at the forefront of international standardization in the wind, solar and marine energy fields for many years, has now gone a step further and launched IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.
Global energy needs are increasing constantly and with the diminishing supply of fossil fuels and rising environmental and safety concerns, renewables are likely to occupy a growing share of the future energy mix. Through its standardization and conformity assessment (CA) work, the IEC is promoting the development of renewable sources for electricity production.
Over the last five years, the cost of renewable power generation technologies has dropped while the technology has improved. Biomass for power, hydropower, geothermal and onshore wind can all now provide electricity competitively compared to fossil fuel-fired power generation, according to the International Renewable Energy Agency (IRENA).
During the United Nations Climate Convention – 2015 Paris COP 21, it was recognized that renewable energy (RE) is a key part of the answer to achieving sustainable development and reducing the impact of climate change. Global electricity networks must adapt and include RE technologies.
Renewable Energy (RE) plays an increasingly important role in providing global populations with clean, affordable, sustainable energy. RE production and use continues to increase thanks to the falling cost of equipment and installation.
Traditionally, women have not been encouraged to participate in science, technology, engineering and mathematics (STEM). As a result, a low number has made it into this field. Standards are meant to improve the safety and quality of products and services used by everyone. However, to achieve this, they must include the significant physiological differences between men and women and their potential impact in daily situations.
Energy efficiency represents the biggest source of untapped energy in the world and, by helping slowing down final energy consumption, one of the main contributors in the reduction of noxious gases emissions. Improved electrical energy efficiency is made possible by standardization work performed by many IEC Technical Committees (TCs) and starts with electricity generation, distribution and storage.
Over the past few months, the Standardization Management Board (SMB) approved several new Chairs who have taken up their roles.
Developed with the participation of industry players, including equipment manufacturers, power producers, insurance companies, test laboratories and certifying bodies, IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications, streamlines a complex process and benefits not only the wind, but other renewable energy industries such as solar and marine.
What is the future for cars, buses and trucks? Manufacturers are competing to stay relevant in the years ahead. The IEC is also paving the way with a number of forward-looking Standards.
Today, a number of different technologies are being developed to extract energy from oceans, such as tidal, river and ocean current and wave power. Though only a few large-scale systems currently operate, several are being demonstrated in Asia, Europe and North America.
The IEC regularly supports key global and regional industry events, which can present the IEC endorsement on their website and materials.
Among these, in 2015, the United Nations General Assembly adopted a dedicated Sustainable Development Goal (SDG) on Sustainable Energy for All (SDG 7), while the year ended in the United Nations Framework Convention on Climate Change’s (UNFCCC) 21st Conference of the Parties (COP21) in Paris, where 195 countries agreed to limit global warming to well below two degrees Celsius
Established in 2014, IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications, is the newest of the IEC Conformity Assessment (CA) Systems.
Energy efficiency (EE) is the most important and easily available source of energy; it can be collected along the entire energy chain, from generation, transmission and storage to final use in industry, homes or transportation. IEC standardization and conformity assessment (CA) work are central to electrical EE at all levels.
The leading renewable source for electricity generation globally is hydropower. In 2016, it generated 16.4% of the world's electricity, reaching 1,064 GW of installed capacity, and supplied 71% of all renewable electricity, according to a report by the World Energy Council.
The demand for energy is growing fast, for electricity even faster. To meet the needs of over 9 billion people by 2050, energy production will have to double while at the same time greenhouse gas emissions will have to be drastically reduced. This can only be achieved through a transition from a carbon-based economy towards a sustainable and efficient energy model that is accessible to all on the planet.
By 2030, total installed PV capacity could range between 1 760 gigawatts (GW) and 2 500 GW. However, if market growth is to remain sustainable, the technology must be enhanced, and the risk for investors, policy makers and consumers reduced, according to a recent report by the International Renewable Energy Agency (IRENA).
According to the International Energy Agency’s (IEA) Renewables Market Report series for 2017, renewables accounted for almost two-thirds of net new power capacity around the world in 2016, thanks to a strong solar PV market. The Report forecasts that though coal will still be the largest source of electricity generation, renewables are expected to halve the gap down to 17% by 2022.
The global transition from fossil fuels to renewable energy is well under way, with record new additions of installed renewable energy capacity, thanks in part to rapidly falling costs, particularly for solar PV and wind power.
Many countries around the world are working towards producing more power from and increasing the amount of renewables to be integrated into national energy supplies.
IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications, has established a new mechanism, which will allow applications from renewable energy test laboratories (RETLs) that cover the power performance assessment of electricity producing tidal energy converters within IEC Technical Specification (TS) 62600-200.
2018 was a year of extreme weather. Some of the lowest and highest temperatures were recorded in both hemispheres, while gale-force winds fuelled wildfires in a number of regions and hurricane-strength typhoons caused severe flooding in others.
A significant number of solar photovoltaic (PV) power plants underperform for various reasons, including deterioration, or to the point that the financial viability of the PV power plant is at stake.
According to the Renewable Capacity Statistics 2019 report by International Renewable Energy Agency (IRENA), 2018 closed with a total renewable energy generation capacity of 2 351 GW, up by 171 GW on the previous year. Of this amount, wind, solar and marine energy, accounted for 564 GW, 480 GW and 500 MW respectively.
The Conference will examine areas including resource assessment, environmental impacts, wave, tidal, offshore wind, floating offshore wind, ocean thermal energy conversion (OTEC) and salinity gradient technologies, as well as storage and integration, policies to enable remote coastal community solutions and technologies to enable micro-electricity demand solutions.
Twenty-two participants from Chile, Costa Rica, Colombia, Mexico, Dominican Republic and the US took part in the MET-CERTIFIED project workshop on IEC standardization and certification of marine energy convertors, to explain the marine technologies sector of IECRE, the IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.